Sunilji
If you see any vendor catalogue for 22 kv( UE /E)or any other voltage grade cable , you wd get most of the parameters like Dimensions,insulation thickness, screen thickness, dia over/under armour, weight of cable/meter , current carrying capacity at set temp in air/ ground/duct etc. Also you wd get resistances/reactances.plus lot more details.You need to only check the cross section area of the conductor and conductor material etc for particular details . Short circuit current withstand capacity is generally important in selecting the size of the cable against the criteria of normal loading on the cable(unless feeder is too long for voltage drop reasons to go for much higher sizes).
Outersheath of the cable should be U/V resistant( mention in the data sheet) . Though Cable tray covers also serves the purpose.
Distance of 1 mtrs of between this cable and other inst. cable is adequate however pl. check with any standard code for the separation guidelines.
Let me know if you need any more feedback.