Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mechanism Fails to Connect (download the model)

  • Thread starter Thread starter Guest
  • Start date Start date
Status
Not open for further replies.
G

Guest

Guest
I cannot get a particular component to connect with mechanism for the life of me. I've tried everything that I could think of, yet it still does not connect. I've included the assembly for you to download and take a look at



http://www.proecentral.com/temp/driveline.zip



The model is not proprietary. The objective here is to assemble the two drivelines to the driveshaft. The first driveline connects just fine, the second one doesn't. The two driveline assemblies themselves are assembled with mechanism connections and are almost identical, except for the length. Once the two drivelines are connected to the driveshaft, I could then (theoretically) move the driveshaft and the drivelines would follow it.



If you have time, please take a look.



Thanks in advance!



Jason
 
Mr Jason



I work on your part and I have sent you already an email, with the assembly attached.

I can
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top