Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Mechanical Seal for Nitric Acid
- Thread starter kamaqal
- Start date
This is always a good source for these queries
In this case it depends on the concentration of Nitric acid. If its between 0-50%, then you can use viton. Otherwise your looking at perfluoroelastomers I'm afraid.
In this case it depends on the concentration of Nitric acid. If its between 0-50%, then you can use viton. Otherwise your looking at perfluoroelastomers I'm afraid.
- Status
Similar threads
- Question
- Question
- Locked
- Question