Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mechanical Properties of steel

Status
Not open for further replies.
Dhan2

Dhan2

Mechanical
Joined
Jan 20, 2004
Messages
2
Location
GB
I am in the process of re-rating an existing carbon steel vessel and am looking for some mechanical properties for the material listed as "tt e36" I believe this is a old DIN standard material. Can any one guide me in order to obtain the following values for the material:

UTS and Yield strength at the ambient temp.
Yield strength at the elevated temp of 100 Deg C.
 
Status
Not open for further replies.

Similar threads

Frankiee63
  • Question Question
Max pressure on stainless steel drum
Replies
2
Views
10K
Frankiee63
Frankiee63
wsmith22
  • Locked
  • Question Question
Proposed Allowable Stresses Based on Guaranteed Strength Properties
Replies
3
Views
3K
TGS4
TGS4
moiz19670309
  • Locked
  • Question Question
Mechanical Seal ASME Jurisdiction
Replies
0
Views
166
moiz19670309
moiz19670309
mariolucas75
  • Locked
  • Question Question
Nominals for steel plates
Replies
4
Views
679
racookpe1978
racookpe1978
numberfive
  • Locked
  • Question Question
Transverse Cracking in Carbon steel welds
2
Replies
22
Views
3K
mfgenggear
mfgenggear

Part and Inventory Search

Sponsor

Back
Top