Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Measuring the hardness of adhesives
- Thread starter Steved
- Start date
Why don't you check with the adhesive supplier itself. I am sure it is influenced by the sustrate, unless you subtract the value that you recived on the plain subtsrate.
There are some prominent suppliers like - CONAP, LOCT-Tite, WELD-Bond, ConaThane, 3-M, Scotch, Kodak, Emerson and Cummings, Dow-Corning, Dow chemical, GE plastics & Silicones division etc. Check with them may be they have an established ASTM procedure.
There are some prominent suppliers like - CONAP, LOCT-Tite, WELD-Bond, ConaThane, 3-M, Scotch, Kodak, Emerson and Cummings, Dow-Corning, Dow chemical, GE plastics & Silicones division etc. Check with them may be they have an established ASTM procedure.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question