Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Measuring angular deviations of an object submersed in fuel using accelerometers

Status
Not open for further replies.

Aled87

Automotive
Joined
Mar 1, 2010
Messages
24
Dear all,

I have a project that i am working on where i need to measure the tilt/angle of an object at high pump speeds over 6000rpm. I was wondering if anybody had any experience of using a wireless accelerometer to dynamically measure angle. And also has to be located in fluid medium and so would need to be prevented from getting wet.

Regards
 
Why not a tilt sensor instead of an accelerometer?

Double post.

Ted
 
Please don't double post. If you absolutely feel that you have to, provide a link to your other thread, so that everyone knows that you have two posts and only replies in one spot. In this case, you have received good responses in thread404-334286. People thinking of posting here would want to know the advice you already received before they spent time responding to you.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top