MCM-Prosoft Module-Map Coils Modbus Adress 1001+

[ner68]

Hi people,

I´m trying to conect a 3100-MCM Prosoft module attached to a PLC-5/40 as Modbus SLAVE to our SCADA systems. Protocol is Modbus Enron.

I made my application based on Prosoft example MCM5EX1S.
I´m trying to report some digital states from the digital input module of PLC-5 to coils in address 1001 to 1005 in the SCADA. Digital states (coils) are input to B11:0/0-4 (Function Code 1) I copied data from B11:0/0-4 to N10:20, and in word N7:8 I wrote 1001 but its not working. All words are based in their example.

Does any one has experience with this module and tell me Where I tell the module that the starting address for coils that the SCADA ask is 1001.


Thanks and regards,

Ner

P.S I contact Prosoft Technical Support to not avail.

 

[DGeo]

Hai,

You can keep in touch with me in geodavisk@yahoo.com
Let me know which scada u are using and what the configuration at scada end.

Geo