Mating conditions for gears

[ronaldvandenbroek]

Is there a way to mate gearwheels (outside of the motion license) so I can reposition them in an assembly..(rotating one of them results in a rotation on the counterpart)?

Thanx...

Ronald

 

[SDETERS69]

Can you set up assembly constraints with angle dimensions and have assembly equations tied to the angle constraint? I am an I-Deas user and this is how I set up my gears to rotate with each other.

 

[ronaldvandenbroek]

Can you set up assembly constraints with angle dimensions and have assembly equations tied to the angle constraint? I am an I-Deas user and this is how I set up my gears to rotate with each other.

Thanx for the answer..I tried your suggestion but, either I'm doing it wrong or it's not possible with NX...