Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Material
- Thread starter shagari
- Start date
Well, I could arguably design a vessel using 516-70 for a design pressure of 5000 psi and a design temperature of 1000°F.
But seriously, you really need to get in touch with somebody who knows what they are doing. Your question is so lacking in information (and I'm presuming "SA-516-7" is a typo) that it demonstrates a terrible lack of comprehension as to what is involved in the mechanical design of vessels.
But seriously, you really need to get in touch with somebody who knows what they are doing. Your question is so lacking in information (and I'm presuming "SA-516-7" is a typo) that it demonstrates a terrible lack of comprehension as to what is involved in the mechanical design of vessels.
- Thread starter
- #3
You obviously do not have access to ASME B&PV Code book sections. If you do, the maximum design temperature for this material is provided in ASME Section II, Part D, the maximum pressure will be based on design by rules in Section VIII, Div 1 or other, design by analysis in Div 2 or 3.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Question