Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Material selection for sulfuric acid

Status
Not open for further replies.
alanb

alanb

Mechanical
Joined
May 25, 2000
Messages
2
Location
US
Hi,<br><br>I have to design some dipping tanks to hold 96% sulfuric acid at 194 degrees F. Any ideas on materials, bearing in mind that cost is an issue too?<br><br>Thanks,<br><br>Alan B
 
Sort by date Sort by votes
Hi, I know that my answer is may be too late but it might be helpful for others.

Try (ZeCore) material it is cheaper than Sandvik SX and has very good corrosion resistance to Acid at this Temp. [sig][/sig]
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Boiler1
  • Question Question
Acid scrubber 'spitting' issue
Replies
5
Views
1K
georgeverghese
georgeverghese
adrich91
  • Question Question
Galvanic corrosion for material choice
Replies
2
Views
9K
Dhurjati Sen
Dhurjati Sen
kootheBUNNY
  • Locked
  • Question Question
Weak sulfuric acid
Replies
9
Views
598
pierreick
pierreick
mjpetrag
  • Locked
  • Question Question
Sulfuric acid injection for Cooling Water pH control
Replies
8
Views
940
georgeverghese
georgeverghese
C
  • Locked
  • Question Question
Guidance on pump selection
Replies
14
Views
8K
georgeverghese
georgeverghese

Part and Inventory Search

Sponsor

Back
Top