Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Material equivalent

Status
Not open for further replies.

juniiee

Industrial
Joined
Apr 19, 2009
Messages
10
Location
DE
what is the material equivalent for:
1. Al99F12
2. X8Cr17
3. X5CrNi18 9
 
1. Don't know, but am guessing it is a 99 % pure Al like Aluminum Association 1100.

2. Type 430, e.g. ASTM A 276

3. Type 304, e.g. ASTM A 276
 
1. is definitely a 99% Al grade like AA 1100 (UNS A91100). The F12 indicates the rolling temper, which would be similar to the H14 or H24 temper. If this is sheet/plate, then you can specify 1100-H14 or 1100-H24 (UNS A91100) according to ASTM B209M.
 
x 8Cr17 1.4016, DIN 17440, BS: 430 S15, ASTM: A 320-10, JIS: SUS 410, GB: 0 Cr18Ni9, IS: X 15Cr25N, Poland: H 17, Romania: 10 Cr170 is in the near.

x 5CrNi18 9 1.4301, DIN 17440, EN 10222, BS: 304 S15, ASTM: A 276, S 30400, JIS: SUS 304, GOST: 08 Ch18N10, IS: x 04Cr19Ni9 is in the near.

Hope this Help
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top