Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

material alternative for cryogenic service gaskets

Status
Not open for further replies.
Luthfi6371

Luthfi6371

Materials
Joined
Dec 30, 2015
Messages
1
Location
ID
Dear all expert,
i have problem with gasket that used for cryogenic service. i used GASKET, FLAT RING: RF FLANGE: SIZE 24IN; CLASS 600LBS; MATL EXPANDED GRAPHITE WITH WIRE REINFORCE. the problem is, gasket always fail/leak during shutdown-start up Plant.

Please share to me another material gasket for cryogenic service else graphit material and asbestos material


Best Regards,
 
Status
Not open for further replies.

Similar threads

Jungpao
  • Locked
  • Question Question
Seal Leak in Atmopsheric side Cold Service Pump
Replies
2
Views
1K
FMJalink
FMJalink
Ramadan Ahmed
  • Locked
  • Question Question
IP68 Rubber Material
Replies
4
Views
1K
satthepbienhoa
satthepbienhoa
65CCJ
  • Question Question
480 Mpa (69,620 psi) static seal for hydrotesting at Room Temp.
Replies
0
Views
7K
65CCJ
65CCJ
F
  • Locked
  • Question Question
Automatic Top up unit for plan 53b
Replies
3
Views
3K
georgeverghese
georgeverghese
J
  • Question Question
Rod & Bore Diameters For 112 Quad Ring + Rod Bore Clearance
Replies
0
Views
1K
JBartlett61
J

Part and Inventory Search

Sponsor

Back
Top