Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Manufacturer of safety valve cast iron / forged steel

Status
Not open for further replies.
Nisogaz

Nisogaz

Petroleum
Joined
Sep 20, 2005
Messages
2
Location
GR
Hi,

I need an angled safety valve for use as an automatic bypass for a pump. The liquid is petroleum. DN80 and flange ASA 150.

Do you know a manufacturer in Europe?

I have already found some but with inlet DN80 and outlet DN125 for steam application. But I need DN80 inlet and outlet.

Thank you in advance.
 
Status
Not open for further replies.

Similar threads

B
  • Question Question
Pressure Limits of Ductile Iron Pipes
Replies
2
Views
669
bimr
bimr
Lawry1183
  • Question Question
Requirement of Manual Ball valve between ESDV and MOV in Pig trap area
Replies
13
Views
5K
georgeverghese
georgeverghese
deepu78
  • Locked
  • Question Question
factor of safety-thread794-245390-follow up query
Replies
0
Views
206
deepu78
deepu78
J
  • Question Question
Jacking Oil Pump Air Lock Bleed Valve
Replies
5
Views
7K
LittleInch
LittleInch
AlbertaMecchie
  • Locked
  • Question Question
Relief Valve set pressures vs. valve body rating
Replies
5
Views
4K
GD2
GD2

Part and Inventory Search

Sponsor

Back
Top