Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

'manufactured using loft' 1

Status
Not open for further replies.
backgear

backgear

Aerospace
Joined
Feb 28, 2007
Messages
2
Location
US
Can anyone elaborate on what 'manufactured using loft' means?

Thank you.
 
Sort by date Sort by votes
What we used to call a loft was a dimensionless drawing on Mylar drawn at full scale. The part was considered acceptable if it fitted in the lines drawn.
This may not be what you are after, others may be able to help more.
B.E.
 
Upvote 0 Downvote

B.E.,

Thank you. That's what I was after.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

manees90
  • Locked
  • Question Question
How to Mesh Surfaces with 90-Degree Bends Using Shell Elements to Minimize Artificial Stresses
Replies
1
Views
6K
SWComposites
SWComposites
KirbyWan
  • Locked
  • Question Question
Using a direct elastic collision with a passing asteroid for propelling a spacecraft?
2 3
Replies
45
Views
1K
moon161
moon161
Mines Mech E
  • Locked
  • Question Question
Honeycomb core panel analysis using Hexcel procedure - QUESTION
Replies
3
Views
615
SAITAETGrad
SAITAETGrad
Wraithlabs
  • Locked
  • Question Question
Cooling a craft if the external temperature is higher than the medium you are using to cool it is?
Replies
5
Views
385
amorrison
amorrison
sateeshsadineni
  • Locked
  • Question Question
How to start using AUTOCAD Nastran-IN-CAD software on Windows 8.1
Replies
1
Views
239
WKTaylor
WKTaylor

Part and Inventory Search

Sponsor

Back
Top