Nov 28, 2007 #1 backgear Aerospace Feb 28, 2007 2 Can anyone elaborate on what 'manufactured using loft' means? Thank you.
Nov 28, 2007 1 #2 berkshire New member Jun 8, 2005 4,429 What we used to call a loft was a dimensionless drawing on Mylar drawn at full scale. The part was considered acceptable if it fitted in the lines drawn. This may not be what you are after, others may be able to help more. B.E. Upvote 0 Downvote
What we used to call a loft was a dimensionless drawing on Mylar drawn at full scale. The part was considered acceptable if it fitted in the lines drawn. This may not be what you are after, others may be able to help more. B.E.
Nov 28, 2007 Thread starter #3 backgear Aerospace Feb 28, 2007 2 B.E., Thank you. That's what I was after. Upvote 0 Downvote
