Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Manual creation of Frequecy response fuctionin UG Advanced simulation

Status
Not open for further replies.
ninjaz

ninjaz

Mechanical
Joined
Apr 2, 2013
Messages
119
Location
IN
Is it possible to create a frequency response function of constant acceleration value (like 35 m/s^2),
manually in UG NX-Advanced simulation.

 
Status
Not open for further replies.

Similar threads

G
  • Question Question
FEA Simulation of a Piezoelectric Accelerometer with Frequency Response Analysis
Replies
2
Views
9K
gnana_235
G
K
  • Locked
  • Question Question
Simcenter SOL108 Direct Frequency Response Graphic
Replies
4
Views
2K
kowalski98
K
C
  • Locked
  • Question Question
CSI Bridge - (Bridge Object Response Display form) girder vs beam moment
Replies
0
Views
1K
changzy
C
joesm519
  • Locked
  • Question Question
Equivalent of "Measures" of Creo Simulate in Autodesk Nastran
Replies
0
Views
802
joesm519
joesm519
Konstantinos_29
  • Locked
  • Question Question
Static Structural simulation of a involute spline
Replies
8
Views
861
Stick.
Stick.

Part and Inventory Search

Sponsor

Back
Top