Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

making Washcoat for catalysator

Status
Not open for further replies.
Pinco

Pinco

Industrial
Joined
Mar 19, 2013
Messages
4
Location
CH
Hi Guys
do you have any suggestions on how to make a washcoat for a catalysator which can handle temperatures as high as possible (1000°C or more)?
would Platin be a good start? or anything more exotic? any other idea other than the washcoat is also more than welcome.......

thanks a lot
 
Status
Not open for further replies.

Similar threads

YungPlantEng
  • Locked
  • Question Question
Any common industry uses for boride diffusion coatings beyond wear?
Replies
0
Views
518
YungPlantEng
YungPlantEng
MDLU
  • Locked
  • Question Question
PTFE coating a fishing line for towing underwater probe in the Arctic
Replies
8
Views
976
MDLU
MDLU
Pkaushal
  • Locked
  • Question Question
CORRISON INHIBITOR FOR ANODIZING BATH ELECTROLYTE
Replies
0
Views
236
Pkaushal
Pkaushal
chem1023
  • Locked
  • Question Question
air bubbles and surface tension for epoxy resin
Replies
3
Views
431
Compositepro
Compositepro
renzokuken01
  • Locked
  • Question Question
polyurethane for magnet wire insulation
Replies
2
Views
335
dgallup
dgallup

Part and Inventory Search

Sponsor

Back
Top