Magnetic Card Reader

[trimmkm]

I am looking for a magnetic card reader (MCR) with the following requirements:
-half insertion read
-RS232 interface
-low profile bezel
-reads all three tracks

If anyone knows of a manufacturer that has such a product, I would greatly appreciate hearing about them.

 

[uWaveFDL]

http://www.posforless.com/magcard.html

http://www.dgahouston.com/msr4.htm

these sites may have what you are looking for.

 

[xray]

You might try digi-key they have a few panasonic units. the specific address is:

http://info.digikey.com/T021/V5/782.pdf

good luck.

 

[trimmkm]

Sorry, I forgot to mention we are interested in an OEM version that we can incoporate into our product. The Panasonic model from Digi-key that could serve (fig 5) is not available until late July at the earliest. We want the flat bezel to provide a low profile surface on the face of our machine. Thanks for the replies just the same.

 

[norse]

check out

http://www.mag-tek.com