Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Magnet Controller

Status
Not open for further replies.
zaphod1

zaphod1

Electrical
Joined
May 7, 2003
Messages
46
Location
US
Hi, Can anyone direct me to a manufacturer of a magnet controller for an electromagnetic chuck in a surface grinder? The magnet is rated for 225Vdc and 10 amps. I would like to be able to adjust magnetism from an analog output of a PLC. I will also need to be aable to demag. with the same controller.
Thanks,
 
Status
Not open for further replies.

Similar threads

Catrin
  • Locked
  • Question Question
how to make an impulse magnet without removing the rest assembly
Replies
5
Views
1K
MagBen
MagBen
TomXY
  • Locked
  • Question Question
Radial Ring in Ring Magnet
Replies
1
Views
972
MagBen
MagBen
Clyde38
  • Locked
  • Question Question
Magnet saturation at magnetization
Replies
6
Views
1K
Clyde38
Clyde38
Clyde38
  • Locked
  • Question Question
Magnet shape with respect to calculating intrinsic flux density
Replies
9
Views
709
MagBen
MagBen
R
  • Locked
  • Question Question
Demagnetize parts close to magneto-elastic sensor in mid drive motor
Replies
2
Views
3K
raficzeqq
R

Part and Inventory Search

Sponsor

Back
Top