Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
machining glass
- Thread starter josson
- Start date
If the tension -- the sum of the externally applied and of
the innner tension -- exceeds the tensile strength, the glass breaks.
It means the machnining must not create large tension
or else you must remove the inner tension with heat treatment. You can visualize the inner tension with
polarized light.
<nbucska@pcperipherals DOT com> subj: eng-tips
read FAQ240-1032
the innner tension -- exceeds the tensile strength, the glass breaks.
It means the machnining must not create large tension
or else you must remove the inner tension with heat treatment. You can visualize the inner tension with
polarized light.
<nbucska@pcperipherals DOT com> subj: eng-tips
read FAQ240-1032
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question
