Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

machining en353

Status
Not open for further replies.
metals2

metals2

Mechanical
Joined
Feb 25, 2002
Messages
2
Location
US
how to machine en353 after carburising &get the right tolerances
 
Sort by date Sort by votes
Depending on how hard you carburized you will probably have to grind it for machining.
 
Upvote 0 Downvote
EDM ? <nbucska@pcperipherals.com>
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

dogbural
  • Locked
  • Question Question
machining a long tube (380mm)
Replies
8
Views
4K
Gr8blu
Gr8blu
MF Afif
  • Locked
  • Question Question
Element deletion on the broken chips during machining
Replies
1
Views
1K
Stick.
Stick.
CTengIS
  • Locked
  • Question Question
Machining marks and surface texture
Replies
1
Views
605
CWB1
CWB1
quizzical1
  • Locked
  • Question Question
316SS machining vendors....
Replies
1
Views
366
bcd
bcd
dshore
  • Locked
  • Question Question
machining silicon brass rod in 144&quot; lenghts
Replies
8
Views
648
3DDave
3DDave

Part and Inventory Search

Sponsor

Back
Top