ninerocket1
Mechanical
I'm on a very limited budget, but need some machinery. Anyone know anything about STK Rebuilders in Elgin? Any info would help
Jim Walker
Southwest Quality Molding
Jim Walker
Southwest Quality Molding
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Machine Rebuilders
- Thread starter ninerocket1
- Start date
- Status
try practicalmachinist.com
Thomas J. Walz
Carbide Processors, Inc.
Good engineering starts with a Grainger Catalog.
Thomas J. Walz
Carbide Processors, Inc.
Good engineering starts with a Grainger Catalog.
No matter what shop you choose try to make a shop visit before you ship any equipment to be refurbished Not doing so cost us two lathes, 10"and 12".
Another thing that happened to us was a shop that had done a lot of work for us went bankrupt with a piece of our equipment on their shop floor. It took nearly 9 months to get the equipment back, it being in the same shape as we originally shipped it.
Another thing that happened to us was a shop that had done a lot of work for us went bankrupt with a piece of our equipment on their shop floor. It took nearly 9 months to get the equipment back, it being in the same shape as we originally shipped it.
dbaird
Electrical
- Mar 31, 2000
- 412
We do machinery rebuilds. Check out our website:
David Baird
Sr Controls Designer
EET degree.
Journeyman Electrician.
David Baird
Sr Controls Designer
EET degree.
Journeyman Electrician.
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question