Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Machine Foundation Vibration Isolation

Status
Not open for further replies.
jamie2000

jamie2000

Structural
Joined
Nov 7, 2000
Messages
21
Location
US
I have designed a foundation to support a large piece of equipment. The machine manufacturer recommends extruded polystyrene insulation for the vibration isolation joint around the perimeter of the foundation. The machine manufacturer states that the machine vibration is 10 Hz. Has anyone used extruded polystyrene for vibration isolation before?

Thanks
 
Status
Not open for further replies.

Similar threads

GTrinh97
  • Question Question
Vibration isolation
Replies
8
Views
3K
271828
271828
lboada
  • Question Question
bridge foundation
Replies
4
Views
771
human909
human909
D
  • Question Question
HUD Foundation Inspections
2
Replies
22
Views
17K
phamENG
phamENG
S
  • Question Question
Foundation Reinforcement
Replies
5
Views
4K
ANE91
ANE91
dianium500
  • Question Question
New foundation encroaching on existing
Replies
3
Views
2K
JAE
JAE

Part and Inventory Search

Sponsor

Back
Top