Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
LUBRICATION SOFTWARE
- Thread starter vanskat
- Start date
diamondjim
Mechanical
I think you might have to set this up yourself
as only you know how heavily and at what periods
of time that the equipment is being used. They
are related. The manufacturer should have given
you a guideline for the equipment when it was purchased.
Most equipment is not overlubricated and is the cause
of many failures.
as only you know how heavily and at what periods
of time that the equipment is being used. They
are related. The manufacturer should have given
you a guideline for the equipment when it was purchased.
Most equipment is not overlubricated and is the cause
of many failures.
LMS2000 is a very good lubrication software program that will schedule, raise job sheets, raise overdue work alarms, raise orders etc. When used with a electronic data logger using Dallas iButtons it becomes a true paperless reporting and recording system that can verify that the jobs are done.
Look it up on
Look it up on
why dont you try the they have a lot of things that would be interesting for you.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
