Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

LS-dyna in Workbench

Status
Not open for further replies.
polaris7eng

polaris7eng

Mechanical
Joined
Oct 1, 2006
Messages
36
Location
PL
LS-dyna in ansys Workbench is relatively new. There are no efficient tutoriales and descriptions for this module.
Does anyone know how to increase the time step?

The first plot show values in time steps but this resolution is not enough. how get plot with smaller time steps?
The second screen show analysis settings. which one is responsible for time step size?
 
 https://files.engineering.com/getfile.aspx?folder=b1b1753f-5719-474c-8d3a-06a0cf1a5afb&file=Capture2.PNG
Status
Not open for further replies.

Similar threads

struclearner
  • Locked
  • Question Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
1K
struclearner
struclearner
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
IJR
  • Locked
  • Question Question
On how and where to insert command snippets inside Workbench mechanical
Replies
2
Views
1K
IJR
IJR
IJR
  • Locked
  • Question Question
Workbench 19: Submodelling (?) error
Replies
0
Views
429
IJR
IJR
md_salem
  • Locked
  • Question Question
how to do share topology in the design modeler in Ansys Workbench
Replies
1
Views
914
Stick.
Stick.

Part and Inventory Search

Sponsor

Back
Top