Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
LPG truck loading facility design 3
- Thread starter adt10
- Start date
-
2
- #2
-
1
- #3
adt10,
Many LPG loading stations use Blackmer or Corken pumps. Check for their recommended piping and recirculation configurations.
There are a number of emergency shutdown valve, back check valve, excess flow valves, and remote trip valves offered by Fisher Controls -Regulators Division, and also REGO Products -ECII. These valves help comply with functional requirements of NFPA 58.
These also desccribe the valves and fittings seen on transports.
(see sections 'G' & 'J' of L-500 catalog)
Many LPG loading stations use Blackmer or Corken pumps. Check for their recommended piping and recirculation configurations.
There are a number of emergency shutdown valve, back check valve, excess flow valves, and remote trip valves offered by Fisher Controls -Regulators Division, and also REGO Products -ECII. These valves help comply with functional requirements of NFPA 58.
These also desccribe the valves and fittings seen on transports.
(see sections 'G' & 'J' of L-500 catalog)
- Status
Similar threads
- Question
