Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

LP Gas Requirements

  • Thread starter Thread starter -
  • Start date Start date
Status
Not open for further replies.

Guest
We have a new project in my plant,
a new production line need 800,000 Btu-h,
If we have 2-shifts 8-hors each on 5-days
results 32'000,000 Btu-h per week.

If we want to storage enough LP-Gas in a tank,
What size of the tank will require for the above mentioned
data consumptions?
 
Around 92,000 btu per gallon, so approx 350 gal/week, say 500 gallon tank required.
 
Oops, I think you the two shifts per day, so it closer to 700 gallons per week. Since you can only fill the tank to 80% full, it's closer to a 1000 gallon tank. Also, is the heat duty before or after the equipments thermodynamic effiency? If there is an 80% effient boiler, then you'll need a little more than a 1000 gallons.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top