Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Low temp application for Incoloy 800 2

Status
Not open for further replies.
heaterguy

heaterguy

Mechanical
Joined
Nov 15, 2004
Messages
99
Location
US
Will Incoloy 800 have any problem operating in -100 deg. F inside of a pressure vessel designed for -265 deg. F? The electric heater inside of a liquid blow down tank has an Incoloy 800 sheath.
 
Sort by date Sort by votes
Yes, the Incoloy 800 sheath material should be acceptable for use at this service temperature.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Johnwoo1991
  • Locked
  • Question Question
F9 and F91 steel for low temp
Replies
1
Views
2K
EdStainless
EdStainless
V
  • Question Question
standard or specifications for low temperature plasma nitriding on 17-4 PH
Replies
3
Views
10K
mfgenggear
mfgenggear
V
  • Question Question
Bolts and Nuts for High-Temperature Applications – Ambiguities in European Standards
Replies
15
Views
12K
dtimberlake
D
novateague
  • Locked
  • Question Question
Optimal Splined Shaft Material for Low Cycle Fatigue
2
Replies
33
Views
2K
novateague
novateague
mechdude777
  • Locked
  • Question Question
Galvanic Corrosion Between Alloy 800 and 825 Weld
Replies
1
Views
422
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top