elminster901
Electrical
LOOKING FOR A GOOD VOLTAGE TO FREQUENCY CONVERTER SCHEMATIC USING A LM331 CONVERTER AND A DUEL FLIPFLOP.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
LOOKING FOR VF CONVERTER SCHEMATIC
- Thread starter elminster901
- Start date
- Status
Look for the caps lock button too....
Why are you not going to the National web site and looking at the LM331 data sheet? It has several!
Keith Cress
Flamin Systems, Inc.-
Why are you not going to the National web site and looking at the LM331 data sheet? It has several!
Keith Cress
Flamin Systems, Inc.-
This is a strange question. Why do you think you need the dual flip flop.
There is a circuit directly on the National product page, let alone going into the data sheet. Do you need the flip flop to guarantee a square wave, for example. If so then wire it as a divide by two (D-type flip-flop with Q(bar) connected to D; drive clk from the LM331).
There is a circuit directly on the National product page, let alone going into the data sheet. Do you need the flip flop to guarantee a square wave, for example. If so then wire it as a divide by two (D-type flip-flop with Q(bar) connected to D; drive clk from the LM331).
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question