Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

looking for transparent polypropylene 1

Status
Not open for further replies.
pesy

pesy

Mechanical
Joined
Apr 12, 2000
Messages
40
Location
US
Hi.
I'm looking for a transparent/translucent polypropylene, if it exists.
If possible, I'd like it to meet the UL94-V0 rating.
Thanks.

Pesy.
 
Sort by date Sort by votes
We use a translucent polypropylene on one of our products. It is injection molded grade, and I believe we get it from GE. I believe it will meet the UL requirements you stated. I don't think it is proprietary, but they went through a lot of research to develop it.
 
Upvote 0 Downvote
Dear Prodeng,

what is the material?
 
Upvote 0 Downvote
It has been a few years since I have injection molded clarified PP. There are a lot of suppliers of raw materials.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

MechMatengineer
  • Locked
  • Question Question
Quality control for plastic piping
Replies
1
Views
3K
Pud
Pud
Azeen
  • Locked
  • Question Question
Mixing virgin and recycled Polypropylene Granules in single use plastic straw extrusion machine
Replies
5
Views
1K
Linda0510
Linda0510
enginesrus
  • Locked
  • Question Question
Adhesive for Polyethylene to Stainless steel
Replies
2
Views
3K
TugboatEng
TugboatEng
mnmzakir
  • Locked
  • Question Question
Polypropylene PP material selection
Replies
1
Views
347
Compositepro
Compositepro
Buckshott00
  • Locked
  • Question Question
Process Setting for Improved Over-molding to prevent delamination In Molded Hytrel
Replies
0
Views
948
Buckshott00
Buckshott00

Part and Inventory Search

Sponsor

Back
Top