Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Looking For Three Way SS V Port Ball Valves

Status
Not open for further replies.
Vienta

Vienta

Mechanical
Joined
Oct 23, 2002
Messages
7
Location
AU
I need to locate a manufacturer of 3 way V port 316 stainless steel ball valves with manual handles. In sizes 25 & 50mm rated to 1000 PSI either screwed BSP or flanged to ANSI600.
 
Sort by date Sort by votes
I would start with either Dezurik and/or Fisher.
David Baird
mrbaird@hotmail.com

Sr Controls Engineer

EET degree.

Journeyman Electrician.
 
Upvote 0 Downvote
If it is going to be a small bore valve (under 4") and a characterized V Seat is acceptable then I would like to MCF Valve. check out tycovalves.com for more information
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

MarcinBookowski
  • Locked
  • Question Question
three-way valve
Replies
5
Views
534
katmar
katmar
mariolucas75
  • Question Question
Welding of duplex SS pipe 30 "
Replies
4
Views
8K
SJones
SJones
N
  • Question Question
Question on V-Loops
Replies
6
Views
15K
KevinNZ
KevinNZ
U
  • Locked
  • Question Question
RPTFE vs PEEK ball valve seal
Replies
3
Views
2K
EngrPaper
EngrPaper
TexasPE
  • Locked
  • Question Question
Required valves for Backflow preventer (Vaccum Breaker) for yard Irrigation
Replies
3
Views
3K
bimr
bimr

Part and Inventory Search

Sponsor

Back
Top