Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Looking for spare 3000 HP wound rotor motor 1

Status
Not open for further replies.

DaveJG

Mining
Joined
Jun 16, 2004
Messages
1
Location
AU
Hi all,
am searching the world for a spare Mitsubishi 3000HP wound rotor motor- 3300 volts, 740 rpm with a frame size of 1000. Can any one offer any assistance at all in regards to this??

Thank you. DaveJG
 

Quite a few near matches there but none match your voltage.

HP RPM
3000 713 Brush, Fr.NWA630/42, 4160 V.
3000 720 Gen.Elec., shredder duty w/controls,2300/4160 V.
3500 720 Gen.Elec., shredder duty w/controls,2300/4160 V.
4000 715 Westinghouse, DP, 2300/4160/6600 V. (2)
5000 720 West.,Fr.10-85-27,DP,2300/4160/6600/13200 V. (2)

Maybe select a 4000hp and connect in 4kv configuration. Operate at reduced voltage of 3kv and derate 75% to 3000hp. You'll have to call to check info not listed framesize etc.

=====================================
Eng-tips forums: The best place on the web for engineering discussions.
 
Please send me complete data, and I will see about quoting new or used. Send data to vectormotors@yahoo.com.
Regards,
Farkle
 
Please give me appliction, eg. rock crusher, etc. Also
need drawings and nameplate data, and secondary circuit
data, and all data pertaining to particular motor that
you can glean. Send to vectormotors@yahoo.com.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top