We have rejected Aluminum screws. The screws were waxed for lubrication, but the wax was too much dry and caused problem in the assembly. I am looking for a reworking source. Could any one please provide me reworking source info for this type of work? This is the first time we have such a problem. Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Looking for rework source for waxed screws 1
- Thread starter unp1
- Start date
-
1
- #2
- Thread starter
- #3
Hi plasgears,
Thanks for your post. But, the problem is, we are just a supplier and don't have any capacity of doing rework in-house. We get the products manufactured in Asia and deliver to our customers in JIT basis. In this case, our customer is facing the problem during assembly.
Thanks for your post. But, the problem is, we are just a supplier and don't have any capacity of doing rework in-house. We get the products manufactured in Asia and deliver to our customers in JIT basis. In this case, our customer is facing the problem during assembly.
- Status
Similar threads
- Question
- Question
- Question
- Locked
