Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Looking for Pressure vessel, plate fabrication position

Status
Not open for further replies.
lfsanek

lfsanek

Structural
Joined
Dec 17, 2003
Messages
1
Location
US
Operations Manager with over 20 years experience in pressure vessel and plate fabrication. Made a career change and looking to go back to pressure vessel and plate fabrication industry. Let me know of openings available.
 
Sort by date Sort by votes
lfsanek;
Instead of posting here, why don't you use the "Jobs" tab in the above tool bar?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Paul Arthur
  • Question Question
Pressure vessel under negative Pressure
Replies
13
Views
6K
Brian Malone
Brian Malone
A
  • Locked
  • Question Question
Singularity rectangular boiler / Pressure vessel
Replies
1
Views
2K
TGS4
TGS4
Ratheesh_n
  • Question Question
stress reliving on 3mm 625 plate butt weld during PQR qualification for utilising in cladded vessel
Replies
2
Views
11K
Ratheesh_n
Ratheesh_n
J
  • Question Question
Vessel for Hydrotest over MAWP
Replies
7
Views
15K
Trestala
Trestala
H
  • Question Question
NACE Requirements for completely Cladded pressure vessel in severe sour stream
Replies
5
Views
3K
SJones
SJones

Part and Inventory Search

Sponsor

Back
Top