Looking for models

[sldwrksrobotics]

Does anyone know where I can download models of "cam lock" fittings, also know as c-couplers.

 

[SnowCrash]

Vendors often have excellent cad files. There are several website with CAD models, Grabcad and 3dcontentcentral come to mind. Mcmaster-Carr is a great resource, too.

--
Hardie "Crashj" Johnson
SW 2011 SP 4.0
HP Pavillion Elite HPE
W7 Pro, Nvidia Quaddro FX580

 

[sldwrksrobotics]

No luck on all three sites.

Thanks

 

[ctopher]

Depends on the type.
I found these on McM-Carr

http://www.mcmaster.com/#cam-lock-fittings/=fre802

Chris
SolidWorks 11
ctopher's home
SolidWorks Legion

 

[ArtL]

Mr. Robotics, Try Carr Lane mfg, carrlane.com

 

[sldwrksrobotics]

Thanks I found those but there are no models (that I can see).

Regards

 

[ArtL]

Mr. Robotics, I found in a rarely used shelf, a catalog For camloc products. It's old enough not to have a email address, but here is the Address and phone # Camloc products,601 Route 46W, Hasbrouck Heights, NJ 07604. Ph 201_288-8300, Fax 201_2888065, Sales office 201_2888309. Hope this is what you need.

 

[sldwrksrobotics]

Thanks I will call them.