Hello. I am looking for one of conveyores that is able to handle gas tight, nitrogen inerting, wider belt width (over 25"). I have found a manufacture that is called UNITRAK. They have the conveyor (Tip Traks) that is applicable for my application, but width of the largest model is 12". If somebody can recomand manufactures of the conveyor that is similer to Unitrak, please let me know. The manufactures should be located in the US. Thank you so much for your time.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Looking for manufactures of gas tight conveyor
- Thread starter mario444
- Start date
MacGyverS2000
Electrical
- Thread starter
- #3
I have requested to design and fabricate a conveyor of the custom width, but their comment is it would require a new mold for the bucket, so it isn't possible to modify the existing one to increase width of the bucket. I need to find out another conveyores that is applicable for our requirement. I found a new design of conveyor that is called EBS conveyor. It seems Fenner Dunlop provides the design and the technical support. I contacted their local ditributor in the US, but they did not know about the model. Please let me know your opinion if you have seen or installed the conveyor.
- Status
Similar threads
- Locked
- Locked
- Question
- Locked
- Question
- Question