Looking for Ion Implanter Cleaning Service

[elfgriper]

Hi All,
I'm looking for a cleaning service that can handle Parts from an Ion Implanter. These would include Analyzer chambers, Len's & Scanner assy's, and other implanter parts that get coated with beam residue. I live in northern calif and it seems like companies that used to provide clean on longer do. I've search the WEB and continue to do so but I haven't hit yet. I'll keep looking but would like to know if anyone out there has a recommendation.
-elf

 

[Giblet]

Hi Elf,

I know of a couple of companies in Europe. OMC Scientific with facilities in Scotland and Ireland is one, and Metron Support in Scotland is another. These guys may have North American outlets. Try a search on the web for those guys.

Giblet

 

[elfgriper]

Hi Giblet,
Thanks for the response. I found one on the east coast that would be able to clean the parts. I don't have the name in mind now but I can get it if you need it.
Thanks -elf

 

[Splatymer]

Hi Guys,
Do you know the name of that place on the East coast? I need to get a waveguide for an 80-10 sandblasted or cleaned and am looking for a place to do it.
Thanks
Splat

 

[elfgriper]

Hi Splat,
Those are normally scrapped clean in the system and the graphite replaced. Removing them is quite a job and probably not worth the effort. However

http://www.semiconprecision.com/tech_page.htm

will take you to a company that can clean that part.
-elf

 

[everydayk]

Hey Guys,

You probley have your needs taken care of, but I've heard of a company in the Bay Area that cleans implanter part's.

http://www.Tri-Bay.net.

Hope I was some help to you guy's.

e-fram