Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Looking for formulation or free pro
- Thread starter israelkk
- Start date
Take a look on:
mirekp
Mechanical calculations
mirekp
Mechanical calculations
- Thread starter
- #3
mirekp:
Thank you for the info.
However, I am looking for more complete and accurate data. The graphs and formula in Danotes are for "mid range" profile shift. It is not clear what "mid range" means, and what will be the formulation for an all recess gear where the shift factor is 1, or for negative profile shift?
Thank you for the info.
However, I am looking for more complete and accurate data. The graphs and formula in Danotes are for "mid range" profile shift. It is not clear what "mid range" means, and what will be the formulation for an all recess gear where the shift factor is 1, or for negative profile shift?
israelkk:
Detail information about algorithm you can find in AGMA standard 908-B89 (page 541-552). Unfortunately I don’t know some detail web resource for it.
Mirekp
Mechanical calculations
Detail information about algorithm you can find in AGMA standard 908-B89 (page 541-552). Unfortunately I don’t know some detail web resource for it.
Mirekp
Mechanical calculations
Software from Web Gear Services calculates AGMA J factors - it may be worth looking into
- Status
Similar threads
- Locked
- Question