Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

looking for compatibility issues with acadlt 2000

Status
Not open for further replies.

dannychristie

Electrical
Apr 1, 2001
2
I am running acadlt 2000 on windows 2000 platform. It does allot of freezing and i have to then reboot. I was wondering if there was a patch for this or it is fixed with acadlt 2000i? Hope someone can help.....
 
Replies continue below

Recommended for you

look for an acad dump file or an acad.err file see if you possibly got any errors also what are you doing when you get kicked out check to see what your autosave settings are and wheather or not you have a virus scanner running in your system tray (its the area next to your clock in the bottom right hand corner of your screen)try booting into windows safe mode or VGA mode and see if you can reproduce it make sure you have all available patches applied
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor