Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Looking for Automobil model created in PRO/E

Status
Not open for further replies.
vaiobrother

vaiobrother

Mechanical
Joined
Mar 30, 2001
Messages
7
Location
GB
I am looking for an 3D Model (prt or asm) of an automobil.
Don´t care what type (not trucks).
I should be able to upload it into PRO/E 2000i.
also any importable models (iges, step ...) are wellcome.

s.koch@parker-emd.com
 
Status
Not open for further replies.

Similar threads

D
Lost Model in Drawing
Replies
0
Views
5K
Den E
D
pmbov
  • Locked
  • Question Question
Creo 10 Pro/program Problems
Replies
7
Views
2K
3DDave
3DDave
Designer_D
  • Locked
  • Helpful tip Helpful tip
Original Pro/Engineer Blue Background Color Values (thread554-165973)
Replies
0
Views
1K
Designer_D
Designer_D
Milan Martikan
  • Locked
  • Question Question
NWF file generator for facilitating routing in PTC Creo Cabling
Replies
0
Views
1K
Milan Martikan
Milan Martikan
freerangequark
  • Locked
  • Question Question
Patterning Issue - Timing Belt Model
Replies
7
Views
1K
3DDave
3DDave

Part and Inventory Search

Sponsor

Back
Top