Looking for an ABS to Rubber solution.

[ShaneDoe]

I am needing to attach a seal to ABS, the Seal material is still up in the air but rubber / silicone are very likely. Is there any chemical solvents that will hermetically attach ABS to Rubber or the like and hold while under 80psi of pressure?

Thanks

 

[CoryPad]

Acetone and MEK are used to solvent bond ABS to itself. I imagine there is an elastomer that can be dissolved with these solvents, though I am not sure they are suitable for your seal application.

If you choose to use an actual adhesive material, here is a design guide from Henkel:

http://www.henkelna.com/us/content_...e_Bonding_Rubber_Thermoplastic_Elastomers.pdf