I'm looking for a V spray injector to be used in a dual intake valve motor. Need it rated 364cc/min at 3 bar with a total height arround 2 inches. This is for an alcohol conversion 600 cc motor. Whoever converted it used a pencil spray style injector in their conversion. I believe it would work better with a V spray to spray toward both valves. This is a ported injection system. Am I looking at this correctly? Open to any suggestions. Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Looking for a V spray injector
- Thread starter YAMAMAN
- Start date
Yamaman,
Check the following threads for background info:
RC Engineering would be a good place to start. If one is available, they should be able to get it.
-Tony Staples
Check the following threads for background info:
RC Engineering would be a good place to start. If one is available, they should be able to get it.
-Tony Staples
- Status
Similar threads
