Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Looking for a GD&T trainer in the Atlanta area
- Thread starter shedric
- Start date
Check the Tec-Ease site ( They're out of upstate NY, but do training around the US & Canada. If there's nothing currently in your area, you can also ask them to look into a session in your area.
Jim Sykes, P.Eng, GDTP-S
Profile Services
CAD-Documentation-GD&T-Product Development
Jim Sykes, P.Eng, GDTP-S
Profile Services
CAD-Documentation-GD&T-Product Development
Per the ASME web site:
Engineers Edge Training Consultants
Contact: Kelly Bramble, Trainer@engineersedge.com
Tel. 770.266.6915
510 Crosslane Rd.
Monroe, Georgia 30356
Website:
Engineers Edge Training Consultants
Contact: Kelly Bramble, Trainer@engineersedge.com
Tel. 770.266.6915
510 Crosslane Rd.
Monroe, Georgia 30356
Website:
roguewrench
Mechanical
Check out etinews.com
We installed this on our network so everyone has access to testing and review of GD&T and everyone is on the same page with it.
This also helped with new employees to get them on the same track as the rest.
We installed this 6 months ago and so far on complaints.
CJ Goodrich
Product Design Engineer
Leatherman Tool Group
Portland, Oregon
We installed this on our network so everyone has access to testing and review of GD&T and everyone is on the same page with it.
This also helped with new employees to get them on the same track as the rest.
We installed this 6 months ago and so far on complaints.
CJ Goodrich
Product Design Engineer
Leatherman Tool Group
Portland, Oregon
- Status
Similar threads
- Locked
- Question
- Locked
- Question