Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

lookin'for "programing manual" for Okuma osp 7000L

Status
Not open for further replies.
thepooh

thepooh

Mechanical
Joined
Sep 16, 2006
Messages
24
Location
FR
Hello I lookin'for prog manual for okuma lb series with 7000L osp !
A friend has just buy a LB15-II M with milling axis
and it miss this book to program !!
 
Status
Not open for further replies.

Similar threads

V
  • Question Question
Designing a Checking Jig for Sheet Metal Hole Positions After Bending
Replies
1
Views
9K
Burunduk
Burunduk
B
  • Locked
  • Question Question
Angle limited clamp for sharpening flat hone machine
Replies
4
Views
3K
mfgenggear
mfgenggear
dgeesaman
  • Locked
  • Question Question
Hard milling for tooling
Replies
3
Views
2K
cnc king
cnc king
S
  • Question Question
Need feedback on my jig design for welding aluminum sheet metal – flatness + dimensional control is key
Replies
10
Views
16K
gtaw
gtaw
dshore
  • Locked
  • Question Question
machining silicon brass rod in 144" lenghts
Replies
8
Views
653
3DDave
3DDave

Part and Inventory Search

Sponsor

Back
Top