Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Lofting with rails - bottom section disappears

Status
Not open for further replies.
soniq24

soniq24

Mechanical
Joined
Aug 15, 2009
Messages
3
Location
US
Lofts fine without rails, but bottom piece disappears when I add the rails.

Thanks for any assistance.

Soniq24
Brisbane CA
 
Status
Not open for further replies.

Similar threads

MarkCA
  • Locked
  • Question Question
Modifying a Part Description without Up-Revving
Replies
1
Views
861
dgeesaman
dgeesaman
imti7
  • Locked
  • Question Question
How to connect two solid sections tangentially in Inventor?
Replies
0
Views
896
imti7
imti7
I
Will inventor work with athlon 3000g cpu 16gb ram 500gb ssd no gpu only cpu integrated praphics?
Replies
0
Views
5K
Isauro1616
I
P
Cut a part with an another which is moving...
Replies
1
Views
7K
PeterMacGonagan
P
P
Problem with snapping in part sketch
Replies
0
Views
9K
PanSam
P

Part and Inventory Search

Sponsor

Back
Top