Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

LOF at the lowest area the first shell (Rv 1)

Status
Not open for further replies.
RE52

RE52

Materials
Joined
Dec 29, 2005
Messages
13
Location
IR
in addition for former questions our standard is API650 and shell thk. in first shell is 20mm and preheat temp. which is mention in WPS 30'c .
 
Status
Not open for further replies.

Similar threads

C
  • Question Question
ID Overlap between the gasket and the raised face flange
Replies
4
Views
635
cheezypuff
C
P
  • Question Question
B31.4 Existing Pipe is Overstressed -what's the path forward?
Replies
8
Views
1K
akpipelineengr
akpipelineengr
H
  • Question Question
Maximum friction losses are 5% in pipes. Who said it first?
Replies
9
Views
3K
bimr
bimr
Sammule
  • Locked
  • Question Question
What are the differences between the Flexibility methods of ASME, API 650, WRC-297 (Bijilaard), and Spherical for Puzzle?
Replies
0
Views
941
Sammule
Sammule
K
  • Question Question
select a suitable material for the tank used to store demineralized water before hydro testing.
Replies
4
Views
8K
pierreick
pierreick

Part and Inventory Search

Sponsor

Back
Top