Locknut AN17 specs 1

[sercher]

I am looking for some specifications for large locknuts starting with AN-17 locknuts. I have looked in the Machinery's HandBook but it only goes up to AN-16. I need to know the major diamitor and pitch diamitor for locknuts up to 4 inches. IF anyone can direct me to a site with that information or E Mail me a chart with specs I would apprecate it.
Thank you

 

[unclesyd]

Take a look at this site.

http://www.taperline.com/second.html

 

[sercher]

Thank you so very much. Just the info I needed. Even more.
Thanks again