Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Location of nozle on knuckle portion of dished head

Status
Not open for further replies.
pve5

pve5

Mechanical
Joined
Sep 13, 2005
Messages
44
Location
CA
Is there any special ASME Section VIII Div. 1 design requirement for nozzle located at knuckle portion of dished head. If there is, any could you provide me reference para number of code

Thank you very much in advance
 
Sort by date Sort by votes
No Code requirement but there will be others here that will tell you to avoid it.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

D
  • Locked
  • Question Question
Design of floating head ( S type )
Replies
3
Views
7K
Shaikh Mohammed Ammar
Shaikh Mohammed Ammar
LOCBE
  • Locked
  • Question Question
Turtle Shelling of Vessel Head
Replies
8
Views
710
LOCBE
LOCBE
Vessel-SA
  • Question Question
nozzle-head PWHT
Replies
14
Views
15K
Trestala
Trestala
hernanrmz
  • Question Question
Internal diameter of Economizer Header - HRSG
Replies
2
Views
14K
TomLee777
TomLee777
RiyadhBPV
  • Question Question
Effect of external corrosion allowance on UG-40 normal to shell limit calculation
Replies
5
Views
3K
SnTMan
SnTMan

Part and Inventory Search

Sponsor

Back
Top