Greetings to all, I am currently designing a gas pipeline, for the calculation of the wall thickness I must obtain the location factor, could you help me indicating the method used in ASME B31.8 for the definition of the different segments where should I select the factor
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Location class, detereminatio gas pipeline
- Thread starter Rotech
- Start date
LittleInch
Petroleum
See ASME B 31.8 section 840.2.
Some experience and knowledge is required to design a gas pipeline - who else is reviewing and approving this design?
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
Some experience and knowledge is required to design a gas pipeline - who else is reviewing and approving this design?
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
