heads1983
Industrial
- May 26, 2011
- 2
If load sensing port is part of valve and is not connected to hydraulique system. will the valve sections work anyway when manually activated? Get the cylinder to extend and retract?
thanks
thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Load sensing in stack valve
- Thread starter heads1983
- Start date
- Status
IceStationZebra
Mechanical
They should work, though you may have a small leak between the A and B ports. ISZ
- Status
